An Instyler curl tutorial describing how to use the Instyler rotating hot iron to create beautiful, defined curls in your hair. Covering steps such as selecting the right heat setting.
Sectioning your hair, and wrapping sections around the rotating hot iron to achieve your desired curl. Also covers techniques for maintaining and enhancing your curls.
Achieve Perfectly Curled Hair with Instyler
The Instyler rotating hair brush is a wonderful styling tool for straightening, polishing, and styling all types of hair. The Instyler’s secret is its rotating heated polishing cylinder and four rows of precisely aligned bristles. The ceramic coated rotating barrel of the InStyler polishes your hair as you brush it and it’s easy to use.
To get those nice tight curls and waves you are going to want to get the 3/4 inch Instyler Rotating brush.
The main distinction is that a flat iron flattens your hair by pressing it against a heat source. The heat source is usually two extremely hot plates.
After that, your hair is baked into place. This process exposes your hair to direct, extremely hot heat, which can damage it in some cases. The Instyler has a significant advantage in that it has a rotating head that heats up. Despite the fact that it uses heat, your hair is not pressed by two flat irons and exposed to high heat.
Because the rotating head is constantly moving, it theoretically performs the same function but better, faster, and with less stress on your hair. The heated rotating barrel spins at more than 100 revolutions per minute, which is the key to how well this tool works.
In addition to straightening your hair, the Instyler is great for adding curls. You can also perform flips and waves. This is something a flat iron will never be able to do.
Here is a step-by-step guide on how to use the Instyler rotating hot brush to curl your hair:
- Get your hair ready: Start with hair that has been washed, dried, and combed through. If your hair is naturally straight, use a mousse that gives hair volume to make it look fuller.
- Choose the heat setting. The Instyler has different heat settings, so choose the one that works best for your hair type and how much hold you want.
- Separate your hair into sections. Cut your hair into small pieces about 1 to 2 inches wide, and clip each piece together.
- Wrap the section: Pull one section of hair tight. Place the Instyler rotating hot brush at the root of the section and wrap the hair tightly around it. Hold the section still for a few seconds to make sure the curl stays.
- Repeat the process. Wrap each section of hair again, making sure to wrap each one in the same direction.
- Set the curls: After you’ve curled all the pieces of hair, give them a few minutes to cool down. Then, scrunch your hair gently with your fingers to make the curls look better.
- Finish with a holding spray. A light mist of a holding spray will help the curls last longer.
Tips For Using The Instyler
Use a heat protectant. Before you style your hair with the Instyler rotating hot brush, use a heat protectant to keep your hair from getting damaged by the heat.
Limit the amount of time you use the Instyler. If you want to avoid heat damage, you should limit the amount of time you use it. Use it briefly and only on small sections of hair at a time.
Start with dry hair. If you want to curl your hair with the Instyler, you should start with hair that is dry and styled. Wet hair can make the brush slip, making it hard to get curls that look the same every time.
Part your hair into sections. This will make styling your hair easier and make sure you don’t miss any spots. You can keep each section of hair separate with hair clips or a comb.
To use the Instyler to curl your hair, hold the brush in your dominant hand with the bristles facing down. Start at the roots and roll the brush all the way down to the ends while holding the hair tight.
Using the Instyler to curl your hair may take a little time to get used to, just like any other hair styling tool. Don’t give up if your first attempt isn’t perfect; just keep trying and you’ll get there.
Before using the Instyler rotating hot brush to style your curls, you should use a heat protectant to keep your hair from getting damaged. It’s best to use a hair dryer to set your curls after using the brush. Once your hair is dry, you can use mousse, gel, or serum to help your curls stand out and stay in place. If you want your curls to look full and smooth, it’s best not to brush or comb your hair after you’re done styling them. Instead, gently pull and shape your curls with your fingers.
How Does The Max Prime Rotating Styler Work To Create Perfect Curls?
The Instyler MAX PRIME Rotating Styler curls and styles your hair by using a rotating heated barrel. Because the barrel turns, it’s easier to make curls that are even and consistent with just one move. The heated barrel of the brush spins around a brush with heat-resistant bristles that gently separate and hold your hair.
To use, you just divide your hair into sections, put the end of each section between the heated barrel and bristle brush, and turn the styler gently to make a curl. The heat and rotation of the barrel hold the curl in place, and the bristles on the brush keep the hair from getting tangled or frizzy. The result is curls that are smooth, springy, and clear.
What Type Of Hair Types Are Best Suited For Curling With A Wand?
Most of the time, a hair wand works best for people with medium-length to long, straight hair or loose waves. People with thin or fine hair can also benefit from using a wand because it helps add texture and volume. Wands are also a good choice for people with thick, curly, or coily hair because they can help define and enhance natural curls.
It’s important to choose the right size wand for your hair type. Larger wands are better for longer, thicker hair, while smaller wands are better for shorter, finer hair. Also, it’s important for all hair types to use a heat protectant to stop damage from the heat of the wand.
How Do I Make Sure My Curls Have A Vibrant Shine When Finished?
Follow these steps to make sure your curls look great after you use an Instyler or any other curling tool:
- Start with clean, healthy hair. Shampoo and conditioner without sulfates will help keep your hair healthy and shiny.
- Use a heat protector. Before you use the curling iron, spray your hair with a heat protector to protect it from heat damage and keep its shine.
- Use a hold product to set your curls. After curling your hair, use a lightweight hold product, like hairspray or mousse, to help set and keep your curls in place.
- To get rid of frizz, put a small amount of serum or oil on your fingertips and run them over the surface of your hair, being careful not to change the shape of your curls.
- Finish with a shine spray. Once you’re done styling, you can use a shine spray to give your curls more shine and color.
Are Loose Waves Possible With The Instyler?
With the Instyler, you can make loose waves. If you wrap your hair around the barrel of the hot brush and hold it there for a few seconds, you can make loose, natural-looking waves. To get loose waves, you should wrap larger sections of hair around the barrel and style for a short amount of time to avoid tight curls. Looser waves can also be made by turning down the heat. Using a styling product with a light hold can also make the waves look better and give them more shape.
Is It Better To Curl My Hair With A Hot Iron Or The Instyler?
Hot irons are more common and have been around longer, but they aren’t as flexible and can hurt your hair if you don’t use them right. The Instyler, on the other hand, is a hot brush that spins. It spreads heat more evenly and can be used to make curls and other hairstyles.
Some people find it easier to curl their hair with an Instyler because it can be less damaging and help them get curls that look more natural. It’s best to try both and see which one works best for your hair type and for you. Use a heat protectant spray on your hair before you use a hot iron or the Instyler to style it.
What Tips Should I Follow If I Want Tight Ringlets Using The Instyler?
Here are my tips on how to use the Instyler to get tight curls:
- Start out with clean, dry hair.
- Use a heat protectant to prevent heat damage to your hair.
- Section your hair that are about 1 inch wide.
- Start curling at the root and hold the Instyler for a few seconds before letting go.
- Work in small sections and keep the Instyler moving to keep your hair from getting burned.
- Use a hair spray with a strong hold to keep your curls in place.
- Use a brush to gently pull out the curls until they look the way you want.
- Always be careful when using heat styling tools and remember to change the heat setting to fit your hair type.
Can I Use A Round Brush In Combination With Instyler To Get Even Better Results?
If you want to get even better results, you can use a round brush with the Instyler. The round brush helps shape and smooth the hair, while the Instyler adds heat and curls the hair. Start by making a curl with the Instyler, and then shape and define the curl with the round brush. This can help you get curls that last longer and look more defined. Use a heat protectant on your hair before using both the Instyler and the round brush to keep it from getting damaged by the heat.
Conclusion And Summary
The Instyler rotating hot brush is a tool for styling hair. It has a hot barrel that spins, which curls the hair and gives it more volume. The Instyler rotating brush is a unique hair styling tool that creates bouncy curls with maximum shine. It works by rotating while heating up to provide maximum speed and convenience.
To achieve the best results, it’s recommended to use it on damp hair to prevent hair damage. The InStyler BLU hair dryer is one of their latest models which provides an enhanced experience with its innovative features. You can use a hair dryer and styling products to help shape your curls.
To achieve the best results, it’s important to use heat protectants and limit the amount of time spent using the brush. The end result should be shiny, bouncy curls that last throughout the day. By using a heat protectant and limiting how long you use the Instyler you can reduce damage to your hair.
The Instyler works best on hair that is medium length or longer, and it can make both tight ringlets and loose waves. The Instyler can also be used with a round brush for even better results. The Instyler is different because it has a hot barrel that rotates. This makes curling and styling easier and faster.
References